單細胞分析平台

Single Cell Analysis Core Facility

N7-加熱型雙槽乾浴器

Genius Dry Bath Incubator

Major science

提供單一細胞編碼與基因建庫分析、外泌體建庫、微量核糖核酸之絕對定量與相對定量分析與應用。

加熱型雙槽乾浴器

產品特色

  • 微處理器控制的數字性能精確，精確控制
  • 廣泛的溫度控制範圍和精準的溫控性能
  • 優異的加熱速度
  • LED 顯示和定時器
  • 使用者溫度校正功能
  • 可以用作水浴槽
  • 一體成型鋁合金內槽
  • 可另外選配功能控制軟件

產品規格

  • MD-02N (雙鋁塊槽)
  • 顯示：LED 顯示
  • 加熱功率：125 瓦 200 瓦
  • 產品體積：200x298x80 毫米
  • 控制器：數位微處理控制器
  • 內槽：一體成形鋁鑄槽, PTFE 塗層
  • 溫度控制範圍：室溫 +5 度C 到150 度C
  • 溫度調整刻度：0.1 度C
  • 在37度C時的溫度均溫度： +/-0.20 度C內
  • 在37度C時的溫度均溫度： +/-0.20 度C內
  • 溫度校正：有
  • 計時器：最多1~999 分鐘; 或持續運行
  • 安全裝置：無漏式內槽、過熱保護、固態繼電器故障偵測
  • 使用溫度：室溫到40 度C
  • 特殊功能：可用成迷你水浴槽或珠浴槽
  • 鋁塊材質：鋁合金
  • 鋁塊型式：標準或客製
  • 額定電壓：100 伏特或220 伏特
  • 重量：約 2.1 公斤 約 2.8 公斤
    ■ 鋁塊
  • 鋁塊材質：鋁合金
  • 尺寸 (寬x長x高) ：79x104x50 毫米
  • 鋁塊提攜孔：有
  • 溫度測量孔：有 (除 microplate 外)

放置地點

國家生技研究園區A棟4樓A408室

管理人員

簡皎芸

電子信箱：happyepi@gate.sinica.edu.tw

電話：02-7750-5554 或 02-7750-5556

Description

The Genius Dry Bath Incubators come in either single or dual block models, along with a complete set of interchangeable blocks. It is designed for a variety of applications, including restriction digest, denaturing DNA melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. The microprocessor controller offers highly accurate temperature control, rapid heating and excellent stability. The temperature can be set in increments of 0.1°C from 5°C above ambient to 150°C. An optional temperature probe is available to place directly in samples. A timer can be set from 1- 999mins. The MD series can be used as a mini water bath or bead bath. Optional Function Control software allows the dry bath incubator to perform real-time data recording through a PC.

Features

  • Digital microprocessor offers precise performance control
  • Highly accurate temperature control and broad control range
  • Rapid heating rate
  • Digital LED display & timer
  • User temperature calibration
  • Molded aluminum alloy chamber
  • Function control software available

Specification

  • Display：LED
  • Power：200W
  • Dimension (WxLxH)：Approx. 7.9"x11.7"x3.2" (200x298x88mm)
  • Controller：Digital microprocess controller
  • Heating Chamber：Molded Waterproof aluminum alloy coated with PTFE
  • Temperature Control Range：5°C above ambient to 150°C
  • Temperature Increment：0.1°C
  • Temperature Uniformity：±0.2°C at 37°C
  • Temperature Accuracy：±0.2°C at 37°C
  • Temperature Calibration：Yes
  • Timer：999 (min) / Continuous
  • Safety：
    Leak proof heating chamber
    Over temperature protection
    SSR failure detection
  • Operating Temperature：Ambient to 40°C
  • Special Feature：Can be used as water bath or bead bath incubator
  • Block Material：Aluminum alloy
  • Block Type：Standard and customized types are available
  • PC Connection：RS232
  • Rated Voltage：110V / 220V~
  • Weight：Approx. 6.2lb (2.8kg)

Blocks

  • Block Material：Aluminum alloy
  • Dimension (WxLxH)：Approx. 3.1"x4.1"x2" (79x104x50mm) for standard type
  • Block Lifter Well：Yes
  • Thermometer Well：Yes (except microplate blocks)

Site

National Biotechnology Research Park Building A, 4th Floor, room A408

Manager

簡皎芸

Email：happyepi@gate.sinica.edu.tw

TEL：02-7750-5554 or 02-7750-5556

回上一頁